The Final Drive Centre

The Total Solution for Excavator Final Drives

Disclaimer

All manufacturers trade marks and names are recognized as belonging to their owners.

Where part numbers or other manufacturers data is used this is for reference purposes only and does not imply that parts supplied by the Final Drive Centre. originate from any specific manufacturer.

Any advice given by the Final Drive Centre or Plant Parts Ltd. is given in good faith but should be checked before purchase.

Our Terms of SaleLegal Privacy Policy and Call Monitoring Policy are also available to view

 

 


Changing the oil

Drain the oil when the gearbox is warm. Turn the gearbox so that one of the plugs on the cover is at the bottom — See picture above.


Remove both plugs and leave to drain. Note: If the gearbox is over-full of oil it is indicative of a problem, refer to the troubleshooting page.


Turn the gearbox so that one of the plugs on the cover is at the top — See picture below.

 

Fill the gearbox with the correct grade of oil until it flows from the lower plug hole.

 

 

Replace the plugs.



 

 

 

Subscribe to FDC Updates